LEDDAR M16-LED Car Mount 3D Printer Model
The file 'LEDDAR M16-LED Car Mount 3D Printer Model' is (f3d,FCStd,step,stl) file type, size is 1.3MB.
The file 'LEDDAR M16-LED Car Mount 3D Printer Model' is (f3d,FCStd,step,stl) file type, size is 1.3MB.
Note that this was created during a university project. The car is from the university and we used a new bumper (hence the color difference) on which we mounted the "LEDDAR_mount_CarMount" piece. The original bumper was left intact.
This mount was created to hold a sensor outside on the rear bumper of a car. The "LEDDAR_mount_CarMount" file is meant to be bolted on the rear bumper. Then the "LEDDAR_mount_MainCase" can slide in that mount.
Note that the wires should go through the "LEDDAR_mount_SideCover" before the wires are connected to the sensor.
Project files:
This project was created in FreeCAD and later imported in Fusion 360 using the uploaded STEP file. The FreeCAD and Fusion 360 files are also uploaded.
The device for which this mount is created: https://leddartech.com/app/uploads/dlm_uploads/2021/04/54A0020_V20.0_EN_Leddar-M16-LED_User-Guide.pdf
| LeddarMount.f3d | 117.1KB | |
| LeddarMount.FCStd | 1.0MB | |
| LeddarMount.step | 421.1KB | |
| LEDDAR_mount_CarMount.stl | 110.6KB | |
| LEDDAR_mount_MainCase.stl | 218.8KB | |
| LEDDAR_mount_SideCover.stl | 110.6KB |
