Led Video Light Portable 120/220V 3D Printer Model
The file 'Led Video Light Portable 120/220V 3D Printer Model' is (stl) file type, size is 101.8KB.
The file 'Led Video Light Portable 120/220V 3D Printer Model' is (stl) file type, size is 101.8KB.
I made a simple video light.
Don't do it if you can't handle mains voltage safely.
The heatsink is small but enough with the bigger fan. Cold air comes from back and pushes the hot air out from the holes on the front
I added an additional 12V fan for better heat transfer.
Size approx: 190mm x 69mm x 69mm
I printed the main body (biggest part) all solid walls because of the mains voltage. Just for safety.
All parts glued with epoxy.
I cut the diffuser sheet from an old monitor. the clearance for the diffuser is 1mm thick.
Remember to check that your M3 bolts are magnetic!
Parts list:
M3 bolts & nuts, various sizes
Thermal Conductive Heatsink Glue
And a small transformer to change 120V/220V to 12V for the fan.
I will probably not answer questions because I rarely visit here.
| Backplate.stl | 72.7KB | |
| Body.stl | 228.6KB | |
| Diffuserfront.stl | 52.4KB | |
| Diffusermagnet.stl | 139.6KB | |
| tripodmount.stl | 51.8KB |
