This is a remix of part of 90 Degree LED Strip Clip and LED strip holder with optional cable holder.
My daughter wanted LED Strip lights for her room but we really didn't want to stick it to the drywall or wood because of the potential for damage when we eventually remove them. I couldn't find exactly what I wanted so I hacked together this. The thumbtacks I used do not fit in the recessed area but it still worked great.
We were using the Govee H61461 lights. A single strip fits in nice and snug. You can get two in if you try but I printed a deeper clip for when I needed to overlap the strips (they were longer than each wall and can't be cut).
I also modified the power cord clip to take a thumbtack and fit the cords as well. (If the STL didn't export correctly, you may need to scale it).
Printed with a 3mm brim to make sure they don't fall over while printing.
I printed enough to do 1 clip every 6 inches but ended up going with closer to one every 12 inches and adding a clip where needed.
| LED_Clip.stl | 76.4KB | |
| LED_Clip_Deep.stl | 85.3KB | |
| Power_Cable_Clip.stl | 54.8KB |
