In the past I glued the strips with silicone on stone, then screwed the strips every 20cm, and I had to remove screws, change strips and then put screws,
Now what I have created is a clamp support to insert the 5050 RGB LED strip ip65, and with this I avoid having to remove screws to be able to change the LED strip.
And finally I have created the same clamp with the possibility of placing the LEDs at 45 degrees, and in two clamp positions according to mounting convenience. (At 45 degrees I like the use of the light generated by the LED better.
| PESTAÑA_LED_v4.stl | 84.0KB | |
| pinza_led_45_grados__INVERTIDO.stl | 84.6KB | |
| SOPROT_LED_TECHO_O_PARED.stl | 64.8KB |
