Take a look at my new mount for led strips on the K1 Max.
It take advantage of 3 pre-made top holes for the side panels.
What you need;
Inserts 6pcs m3 short
M3x12 6pcs
24v LED Stripes 2pcs 310mm or 3pcs if you want to have one at the front like i have. I did not use a mount for that one.
Make or buy a y-splitter for the electrical connection. Left and front I connected in series and connected them to the splitter. Right just plug in to the splitter.
I used 4pcs female and 3pcs of male jst 2 pin connectors. That gives me one extra connection for additional lights.
6 black cables 100mm each
Original front LED uses JST "mini" connection, I replaced it with a regular size JST 2 pin male connector that fit my splitter. Look at my simple diy splitter in thumbnails.
Note:
I needed to use superglue for mounting the LED strips due to not sticking to ABS+ very well.
Have a kick ass day!
//Firefly
| ledstripmountk1max.STL | 25.3KB |
