LED Strip Corners 3D Printer Model
The file 'LED Strip Corners 3D Printer Model' is (stl,skp) file type, size is 556.2KB.
The file 'LED Strip Corners 3D Printer Model' is (stl,skp) file type, size is 556.2KB.
Corners to neaten and support soldered joints in LED strips (90, 120 & 150 deg).
Specifically for WS2812b, but can be used with any 10mm wide strip if the wire guides are cut out or the files are edited to suit.
EDIT:
Added "T" joints as requested. I have not printed these so I cannot verify they work, but they are re-mixed from the corners files and therefore should be OK.
2 Styles
LEDCornerTbase and LEDCornerTcover should take a continious uncut strip across the T
LEDCornerT1base and LEDCornerT1cover allows the strip across the T to be cut to maintain symmetry of all 3 legs.
LEDCornerTcover looks very fragile.
EDIT:
Also found powered end and cover on my PC
| LEDCorner.stl | 39.3KB | |
| LEDCorner120.stl | 12.5KB | |
| LEDCorner150.stl | 14.1KB | |
| LEDCorner2.skp | 1.3MB | |
| LEDCorner90.stl | 12.8KB | |
| LEDCornerT1base.stl | 10.4KB | |
| LEDCornerT1cover.stl | 4.6KB | |
| LEDCornerTbase.stl | 8.9KB | |
| LEDCornerTcover.stl | 3.6KB | |
| LEDend.stl | 16.1KB | |
| LEDendover.stl | 2.4KB |
