LED Makerbot Logo Nightlight 3D Printer Model Free Download

Description Files (3)

Summary

Here's a video of it in action...

https://www.youtube.com/watch?v=-4FPl4xUSe8&feature=youtu.be#start=0:00;end=0:15;cycles=-1;autoreplay=true

Here's a group I made for my LED lights and things, if you like my LED designs, join the group and you'll be updated as I upload new ones... I plan on making a lot more logos just like this. So if you have and suggestions, please tell me and I'll make it.

http://www.thingiverse.com/groups/things-with-leds/things

This is a extruded LED Makerbot logo I printed on my dual extruder... I took a JPEG of the Makerbot logo and traced it in Solidworks... I then extruded and filleted the letters and saved them as their own STL to be used in dual extrusion... I then designed a plate around the letters, added holes for screws and save that as its own STL... Lastly, I design a shell to go around the plate and letters, the shell has aligned screw holes so it can be fastened to the plate...

I then printed the shell in regular ole black PLA on my Rep 2... And I did the dual extrusion using the same black PLA for the plate and I used Bendlay (link below) to print the letters... I used Bendlay because it is extremely translucent (91% of light passes through)...

I then hooked up an RGB LED strip, wrapped it around the inner shell and hooked it up to an IR receiver so it can be controlled with a remote...

I've also made the following logo's, designs for LED hookup...

Bendlay Link:
http://www.amazon.com/MatterHackers-BendLay-Filament-1-75mm-MakerBot/dp/B00K1NRCIY/ref=sr_1_1?ie=UTF8&qid=1435347958&sr=8-1&keywords=bendlay&pebp=1435347954416&perid=1WG2SRVP9TGP9WAM748W

MB_LOGO_Case.STL	208.2KB
MB_LOGO_Letters.STL	1.1MB
MB_LOGO_Plate.STL	230.6KB

LED Makerbot Logo Nightlight 3D Printer Model

Summary

Tags

You might also like