LED Light Mounting Bracket For Terrengen Wheelchair 3D Printer Model
The file 'LED Light Mounting Bracket For Terrengen Wheelchair 3D Printer Model' is (stl) file type, size is 60.4KB.
The file 'LED Light Mounting Bracket For Terrengen Wheelchair 3D Printer Model' is (stl) file type, size is 60.4KB.
This is a LED-light mounting bracket which fits the roll bar of the norwegian all-terrain wheelchair Terrengen. This mounting bracket is ment for the old type Hamron 24x3 W LED bar from Jula.
Assembly:
Use 2mm rubber gasket between the roll bar and the mounting bracket.
Make a M6x33,5mm pin for the hinge. I just cut a partial thread M6 bolt.
Use a M6x20mm and a M6x45mm bolt with washers and lock nuts to mount the bracket and the LED bar.
| Lysfeste_Terrengen_ny_Del.1_repaired.stl | 179.9KB | |
| Lysfeste_Terrengen_ny_Del.2_repaired.stl | 104.5KB |
