Led Hexagonal Panels 3D Printer Model
The file 'Led Hexagonal Panels 3D Printer Model' is (stl) file type, size is 383.9KB.
The file 'Led Hexagonal Panels 3D Printer Model' is (stl) file type, size is 383.9KB.
I took BigJim36's design and modded it to my needs. I've added a tab which not only adds a screw hole to mount it cleanly but adds a way to cable tie to the wires out of the way. I also moved holes to where I need them.
I've have added new piece to put the wemos d1 mini I used for the controller. The wemos friction fits on the inside.
I used 27 leds per panel (60leds per meter), you can probably fit 28 in each panel but I wanted 11 panels. A 5m strip had 3 leds left over.
Using a 5v 20amp power supply which I created a cover for here: https://www.thingiverse.com/thing:4945757
The code I used was from here: https://github.com/NimmLor/esp8266-nanoleaf-webserver
These are very helpful when wiring:
https://www.amazon.co.uk/SRunDe-Connector-Controller-Adapter-WS2812B/dp/B08TLZBCLC/
LEDs used:
https://www.ebay.co.uk/itm/124295445848
Power supply used:
https://www.ebay.co.uk/itm/384284198672
PLA used was Sunlu Black PLA+ and White PLA+
| Bottom_Left.stl | 70.4KB | |
| Bottom_Right.stl | 133.6KB | |
| LedPanelLid1mm.stl | 1.1KB | |
| Left_1.stl | 63.2KB | |
| Left_2.stl | 64.1KB | |
| Middle.stl | 75.3KB | |
| Middle_Left.stl | 79.1KB | |
| Middle_Right.stl | 92.5KB | |
| Right_1.stl | 104.6KB | |
| Right_2.stl | 115.5KB | |
| Top_Left.stl | 91.7KB | |
| Top_Right.stl | 203.7KB | |
| Wemos_case.stl | 15.9KB |
