LED GU10 Spot Lamp 3D Printer Model
The file 'LED GU10 Spot Lamp 3D Printer Model' is (stl) file type, size is 559.3KB.
The file 'LED GU10 Spot Lamp 3D Printer Model' is (stl) file type, size is 559.3KB.
A quite simple LED spot lamp.
Notes to the design:
The taps can, when printed at some printers (at least mine), break off, but the shade fits quite firmly to the holder, and this will normally be enough to hold it, otherwise glue will do the trick.
Preparing the print:
spotBoejle.stl should be X axis rotated 270 deg
spotBaseTop.stl should be X axis rotated 180 deg
to print without support.
The rest should print as they are without support.
Hide and connect the wires in the base cover.
The socket used is from here: http://www.bjb.com/index.php?productid=242025 but other models will probably fit as well.
Update 2016-09-22: An updated version without taps added and a base version for 3 spots added. Note that the holes along the side at the picture are not present in the design file. Cover for the unused holes is added too.
| spotBase.stl | 58.1KB | |
| spotBaseProp.stl | 106.5KB | |
| spotBaseTop.stl | 252.8KB | |
| spotBoejle.stl | 64.9KB | |
| spotHolder.stl | 82.8KB | |
| spotHolderUtaps.stl | 206.1KB | |
| spotLongBaseTop.stl | 252.2KB | |
| spotLongBottom.stl | 46.8KB | |
| spotSkaerm.stl | 320.5KB | |
| spotSkaermUslidser.stl | 315.3KB |
