3D print a frame for Adafruit LED Glasses IS31FL3741. Use any Adafruit Feather compatible board to control the LED Glasses. The Feather is secured to the arm with M2.5 x 6mm screws and hex nuts. The two arms are secured to the frame with M2.5 x 14mm long machine screws and hex nuts. The frame is secured to the LED glasses PCB with M3 x 6mm long screws and hex nuts. The Feather connects to the LED glasses using a 50mm STEMMA QT cable.
Learn Guide
https://learn.adafruit.com/3d-printed-frame-for-led-glasses-is31fl3741
Adafruit LED Glasses IS31FL3741
https://www.adafruit.com/product/5210
Adafruit LED Glasses Driver - nRF52840 Sensor Board
https://www.adafruit.com/product/5217
50mm STEMMA QT Cable
https://www.adafruit.com/product/4399
Feather RP2040
https://www.adafruit.com/product/4884
M3 Hardware Kit
https://www.adafruit.com/product/4685
M2.5 Hardware Kit
https://www.adafruit.com/product/3299
USB-C cable
https://www.adafruit.com/product/4696
| 5210_LED_Glasses-IS31FL3741.3mf | 618.2KB | |
| 5210_LED_Glasses-IS31FL3741.f3d | 1.1MB | |
| 5210_LED_Glasses-IS31FL3741.step | 1.4MB | |
| 5210_LED_Glasses-IS31FL3741.stl | 3.0MB | |
| arm-feather.3mf | 47.9KB | |
| arm-feather.stl | 159.2KB | |
| arm-right.3mf | 40.2KB | |
| arm-right.stl | 126.0KB | |
| Arm_BLE.3mf | 47.1KB | |
| Arm_BLE.stl | 155.3KB | |
| LED_glasses_frame.3mf | 60.1KB | |
| LED_glasses_frame.stl | 199.4KB | |
| LED_Glasses_Frame_v20.f3d | 4.9MB | |
| LED_Glasses_Frame_v20.step | 4.5MB |
![64×64 RGB Matrix [2.5mm Pitch] With Raspberry Pi Mount 3D Printer Model](https://res.3axis.co/dc0a211b-8d23-407c-bc3f-fbf816c094e9/images/5fda6c1e-8da1-444a-85f0-5af9b43bfada_thumb.jpg)
