LED Balloon Insert 3D Printer Model
The file 'LED Balloon Insert 3D Printer Model' is (stl) file type, size is 174.6KB.
The file 'LED Balloon Insert 3D Printer Model' is (stl) file type, size is 174.6KB.
An insert to put a DIP type LED inside a balloon and allow it to be filled and tied off easily.
Has recess in the bottom for a 2X10MM magnet.
This works with the throwie kit that we sell at LilyLEDs
http://www.lilyleds.com/Products/113/LED-Throwies
The grooves are for tie-off's or elastics.
It will need a plug for inside the bottom or could put some thin tape or something over the magnet before inserting it to give a good seal.
Could also be used as a thrust or propellant device for balloon powered vehicles.
I printed one on a Makerbot and it needs to be upscaled maybe 3-4% for the pieces to fit in.
It did print better horizontally,
Edit this in the browser in its original location on Orchard:
https://3dorchard.com/app/single/58704cac3718e40c0498d0b1/58e8f3121535440c7c94e12e
| part--1.stl | 1.6MB |
