This is a 400mm internal LED light.
Designed and being used for lighting whilst nail varnish is being applied by my wife.
Can be used for any purpose to give a nice shadow free illumination.
LED cut out is to allow for 2 x 10 mm wide 5050 led strips.
Changed the locking joints, as seen which work very well. The sides are beveled to allow for filler and sanding to get a good looking arch with out joints visible.
Total print time circa 25 hours over 4 prints on a Wanhao duplicator6.
Size comparison in last photo.
Too small? see my larger one here....
http://www.thingiverse.com/thing:2047623
Enjoy
individual parts now added for smaller print beds.
| foot.stl | 2.5MB | |
| lhs.stl | 1.0MB | |
| part1.stl | 460.5KB | |
| part2.stl | 592.6KB | |
| part3.stl | 596.2KB | |
| part4.stl | 464.5KB | |
| rhs.stl | 1.0MB |
