I saw the Led Bridge Lamp by OPOSSUMS (https://www.thingiverse.com/thing:1639224) and I wanted to print it but it was huge an I simply wanted to make my own... So here it is :)
You'll need 15 Segments and both feet.
Printing time was about 3 hours per segment and 4 hours per foot which makes a total of about 53hours....
The bow has a diameter of about 1 meter.
You can attach 3 LED-strips:
-2 in the inner side (facing towards the desk)
-1 inside the lamp (facing towards the outside) (to illuminate the inside of the lamp and
the surrounding area)
In one of the feet is a hole for a potentiometer, one for a power source and one for the led connectors
| FootLeft.stl | 320.0KB | |
| FootRight.stl | 168.9KB | |
| HalfCurvedSegment.stl | 204.3KB | |
| HalfStraightSegment.stl | 120.1KB | |
| Segment.stl | 524.8KB | |
| StraightSegment.stl | 147.4KB |
