These two cards are designed to fit all the Leatherman flat bits as well as a pair of brass calipers from amazon and a micro flash drive from dslrkit on amazon. I had a tight space requirement so these are about as thin as possible so if you have more room id recommend adding .2mm-.4mm to the bottom because right now there is only one layer as the bottom. also the calipers will need to be modified (cutting ~1in off) for them to fit unless you can find one that's already 3in long.
| back_card_2.STEP | 210.1KB | |
| back_card_2.STL | 213.6KB | |
| back_card_no_scisors.SLDPRT | 265.2KB | |
| inside_card.SLDPRT | 288.1KB | |
| inside_card.STEP | 283.0KB | |
| inside_card_2.STL | 223.2KB |
