Laves Modular Display And Storage 3D Printer Model
The file 'Laves Modular Display And Storage 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'Laves Modular Display And Storage 3D Printer Model' is (stl) file type, size is 1.0MB.
These compatible components add function to the Laves Lattice found here: https://www.thingiverse.com/thing:4742625
The “Feet” can be added to any downward oriented pieces to add stability. The “End Caps” are purely aesthetic and can be added to any unattached ends.
The remaining components replace the horizontal pieces in the lattice. They can be added in any combination, and the lattice can be expanded infinitely in any direction.
The snaps are designed to favour stability over ease-of-use, meaning they will be tight to connect the first few times until the snap surfaces are smoothed out. If you have difficulty connecting them or prefer a looser fit a few passes over the snap surfaces with a file will do the trick.
Use glue if you want them connected permanently.
| Bowl.stl | 818.0KB | |
| End_Cap.stl | 191.1KB | |
| Feet.stl | 386.9KB | |
| Pedestal.stl | 760.1KB | |
| Vase.stl | 970.2KB |
