Latching Broom Handle Clamp Hanger Holder 3D Printer Model
The file 'Latching Broom Handle Clamp Hanger Holder 3D Printer Model' is (blend,stl) file type, size is 280.4KB.
The file 'Latching Broom Handle Clamp Hanger Holder 3D Printer Model' is (blend,stl) file type, size is 280.4KB.
This is a broom or tool holder that snaps shut to secure circular handles. This particular instance was designed to fit around a 21mm diameter broom handle, but it works with similar diameter handles. It could feasibly be scaled for much larger things as well, however the screw holes and hinge pins will need to be adjusted as well. This thing prints in place in one piece with no supports (see print settings for specifics). I used nails that were 1.7mm in diameter as the hinge pins. Includes two counter-sunk holes to fit most small screws, as always, pre-drill your wall for best results.
Here is a video of this particular one in action: https://gfycat.com/ImmenseBeneficialLabradorretriever
| Broom_Clamp.blend | 942.5KB | |
| Broom_Clamp.stl | 291.0KB |
