Securely latching variable size print in place box
This is a the second in a series of latching print in place boxes, this version has two latches and is more suitable for wider boxes. Just like the first version https://www.thingiverse.com/thing:6059631 it will securely hold shut even if dropped. There is a grove in the lower haft for an optional seal made of 1.75mm TPU filament. This will NOT make the box water proof merely more water resistant.
To start off I have uploaded sixteen versions of this box delineated by internal dimension. The size is listed at the end of the file name by _width_length_height in millimeters. I can upload other sizes in the future if requested. The box can be any reasonable width or length but must be between 43mm and 70mm in height.
| Latch_Box_Type2_120_80_43.stl | 2.8MB | |
| Latch_Box_Type2_140_70_50.stl | 2.8MB | |
| Latch_Box_Type2_150_96_70.stl | 2.8MB | |
| Latch_Box_Type2_160_160_43.stl | 3.0MB | |
| Latch_Box_Type2_170_150_70.stl | 2.9MB | |
| Latch_Box_Type2_180_180_50.stl | 3.0MB | |
| Latch_Box_Type2_190_110_60.stl | 2.9MB | |
| Latch_Box_Type2_194_92_70.stl | 2.8MB | |
| Latch_Box_Type2_200_70_43.stl | 2.8MB | |
| Latch_Box_Type2_200_75_43.stl | 5.5MB | |
| Latch_Box_Type2_200_75_60.stl | 5.6MB | |
| Latch_Box_Type2_200_80_60.stl | 2.8MB | |
| Latch_Box_Type2_204_77_43.stl | 2.8MB | |
| Latch_Box_Type2_204_77_60.stl | 2.8MB | |
| Latch_Box_Type2_220_50_50.stl | 2.7MB | |
| Latch_Box_Type2_230_140_70.stl | 3.0MB | |
| Latch_Box_Type2_234_100_43.stl | 2.9MB | |
| Latch_Box_Type2_234_72_60.stl | 2.8MB | |
| Latch_Box_Type2_250_150_50.stl | 3.0MB | |
| Latch_Box_Type2_300_200_60.stl | 3.2MB | |
| print_in_place_hinge_test_015.stl | 278.0KB |
