This is the adjustable door latch / catch for my elfin2 door project.
I have no idea what "size" this thread is, because I used a large thread that appealed to me, and scaled it down to fit the project. Pitch and diameter are just random. Same goes for the bolts that hold the hinges on.
The door project is here. https://www.thingiverse.com/thing:4688246
The non-adjustable clasps that hold the cover to the machine's base is here. https://www.thingiverse.com/thing:4690132
I used some 5-minute epoxy to attach this one to the cover. It holds the door closed and that's all I ask. Seems like nothing wants to stick to this resin. It's firmly on there, but it'll probably pop off if you adjust it too tight, and stress it.
The backside of the latch is curved to fit the Elfin's cover's profile near the corner, but they could easily be edited and flattened and the latch might be useful elsewhere.
| All_Files_latch+adjustable+for+Elfin+door.zip | 2.2MB | |
| Arm.stl | 30.7KB | |
| Base.stl | 33.9KB | |
| Catch.stl | 22.4KB | |
| Nut.stl | 487.1KB | |
| Pin.stl | 12.4KB | |
| Threaded_Adj_Rod.stl | 1.2MB |
