Update : 2020-12-20 12:20
Added ChiTuBox project and printer file for LaserTorch V2+. Inludes interna sipports as well. Printing V2+ right now...
Update : 2020-12-19 20:55
!!! Added the file "LaserTorch V2+.stl" where the mounting hole has gone from 9.5mm to 9.25mm decreasing the offset for overcure. also I shrunk the inner diameter of the hose connector as it looks to fragile, the original piece has a 3mm opening, the new model has a 2.8mm opening.
Original post below:
The air assist tube on the 10W Endurance Laser was to long to use when changing to the G7 lens so I made this attachment that use the same tube as the original part.
Preferably printed on a DPL resin 3D printer.
The part is a bit fragile but there are no forces except airflow coming from the hose.
Probably usable on any laser as it fits on the lens holder.
| LaserTorch_V2+.stl | 835.1KB | |
| _LaserTorch_V2+.cbddlp | 19.5MB | |
| _LaserTorch_V2+.chitubox | 1.6MB | |
| _LaserTorch_V2.cbddlp | 19.1MB | |
| _LaserTorch_V2.chitubox | 1.4MB | |
| __LaserTorch_V2.stl | 1.9MB |
