Lasercut Settlers Of Catan Board As DXF
The file 'Lasercut Settlers Of Catan Board As DXF' is (dxf,svg) file type, size is 1.4MB.
The file 'Lasercut Settlers Of Catan Board As DXF' is (dxf,svg) file type, size is 1.4MB.
This is simply a derivative to be used by laser cutters that require DXF format files. I converted this using the latest version of Inkscape (0.48.4). Also had to move a few of the dots around and converts all the fonts to paths.
Cutting took about 40 minutes through 4mm MDF.
Update1: catan03-1.dxf do not use this without cutting an extra wheat tile
Now has more coloured paths. Also I removed the dice value from the desert as it won't have one in the game. warning, this has the wrong number of tiles so you'll need an extra wheat tile from http://www.thingiverse.com/thing:127087
Purple - Boats, possible raster engraving
Green - Text, possible raster engraving
Black - Outlines, engrave cut
Blue - Circle cuts
Red - Tile cuts
Update2: catan04-1.dxf - removed due to issues
Update3: catan4-2.dxf & tree04-2-tested.dxf
Fixed a few problems that were showing up in the lasercut software but don't have the materials to do a test cut of the full set of tiles. I've also created a new tested single tree tile as I believe this is the tile causing most of the problems so feel free to try this single tile out and see if it works.
| catan-desert-1.dxf | 62.6KB | |
| catan-desert-1.svg | 42.7KB | |
| catan03-1.dxf | 2.6MB | |
| catan03-1.svg | 1.1MB | |
| catan04-2.dxf | 6.5MB | |
| catan04-2.svg | 635.1KB | |
| tree04-2-tested.dxf | 903.4KB |
