Lasercut IPAD 2 Stand
The file 'Lasercut IPAD 2 Stand' is (svg) file type, size is 6.4KB.
The file 'Lasercut IPAD 2 Stand' is (svg) file type, size is 6.4KB.
lasercut ipad2 stand
cut on a glowforge from 3.6 mm plywood (1/8 inch)
made to sit on the reception at my employer and do the registration of visitors
the hinge allows the teblet to be placed in different angles, and then locked with the "fork"
if needed you can take off the bolts in the hinge and turn it 90 degrees to swicth to landscape. (might be carefull about tipping the ipad out when you do, or secure it in some way)
additional components:
make sure all the glue is dried and well cured before placing an ipad in the case ;)
i used an angled ipad charging cable like this to make sure the cable was not sticking out the bottom
| Ipad2-stand.svg | 60.7KB |
![Laser Cut Anycubic Resin Vat Drip Stand [ Photon, Mono Etc]](https://cdn.3axis.co/assets/9f/fb/cd/21/9ffbcd21-04b9-4995-be36-a8d6bf066c02/images/f8a4c6d3-71bf-4f8d-95d1-aaa3a6d78f33_thumb.jpg)
