I gave my son my old Soundwave, which he loved, but the cassettes were long gone. So here's a simplified version of Laserbeak to take it's place (I wanted to keep it chunky because he's 4 years old). He (she?) fits in the gen1 Soundwave.
Instructions:
Print all 6 parts. Head snaps in place, it's a tight fit so you may want to trim the end of the pegs slightly.
You'll need a short piece of 1/8" rod to pin each wing in place, I used styrene that I had laying around.
This is a first go around so there's some tweaking to do and he's requested a transforming bunny next....
Edit: Added the guns. 3 pieces. Print two of the gun part and one of each booster. Glue a gun to each booster and you're good to go.
| Laserbeak-Booster-Left.STL |
| Laserbeak-Booster-Right.STL |
| Laserbeak-Gun.STL |
| lb_-_Body-1.STL |
| lb_-_Head-1.STL |
| lb_-_Leftfoot-1.STL |
| lb_-_Leftwing-1.STL |
| lb_-_Rightfoot-1.STL |
| lb_-_Rightwing-1.STL |
