When I was a kid, Star Trek was my favorite show. My 3D printer is as close to a replicator as I'll see in my lifetime, so I decided to get into it and design a comprehensive Laser Pistol as was used in a few of the first episodes of the program.
The trigger works (with a standard spring from a cheap pen,) the muzzle rotates, the barrel is hollow and screws into the receiver to allow the addition of electronics. It's pretty cool, if I say so myself. :)
The parts are oriented as I printed them I used a brim on the trigger, but other than that, it should print pretty well.
The “frog” is the thing that'd let you hang it on a belt. If you wanted to use it, you'll need (2) 20x3mm round magnets and (4) 20x5x2 rectangular magnets. If you want a display model, I included dummy magnets you can print.
Assembly should be pretty straightforward. Non-moving parts are intended to be glued together. The middle ring should be glued to the barrel.
In the spirit of Star Trek, I provide this model for free. It is my fondest wish it gets enjoyed by a wide audience.
| Barrel.stl | 528.3KB | |
| Button_x_3.stl | 76.2KB | |
| FrogBelt.stl | 85.8KB | |
| FrogDummyMaget_x_2.stl | 684.0B | |
| FrogDummyMagnet.stl | 9.5KB | |
| FrogGun.stl | 12.0KB | |
| GearPin_x_2.stl | 41.6KB | |
| Gear_x_2.stl | 66.9KB | |
| GripButt.stl | 101.6KB | |
| GripLeft.stl | 352.5KB | |
| GripRight.stl | 387.9KB | |
| LensLarge.stl | 41.8KB | |
| LensMedium.stl | 35.9KB | |
| LensSmall.stl | 30.9KB | |
| Receiver.stl | 445.0KB | |
| RingMid.stl | 30.0KB | |
| RingMuzzle.stl | 625.5KB | |
| RingReceiver.stl | 612.0KB | |
| Stand.stl | 175.8KB | |
| Stick.stl | 113.1KB | |
| Tag.stl | 332.3KB | |
| Trigger.stl | 51.3KB |
