Laser Mount For Firearm With 9-11mm (3/8″) Dovetail 3D Printer Model
The file 'Laser Mount For Firearm With 9-11mm (3/8″) Dovetail 3D Printer Model' is (3mf,stl) file type, size is 309.7KB.
The file 'Laser Mount For Firearm With 9-11mm (3/8″) Dovetail 3D Printer Model' is (3mf,stl) file type, size is 309.7KB.
YOU NEED 2 THREADED INSERTS (M4) AND 2 SCREWS !
Print a part in which laser will be attached in a way, that it will "stand" (long side needs to be vertical, so printed part is flexible.)
Was made for Gamo air-rifle as secondary quick aim assist for the close range. It will fit under the scope and it will be next to it.
For better aim use paper/"two sided duck-tape" to correct laser diode offset, if it is not in same axis as laser body.
Laser pointer used:
https://www.laserfuchs.de/en/p/70107227
(Dot laser, red, 650 nm, 1 mW, Ø15x67 mm, Laser Class 2, Focus fixed)
2x inserts:
https://www.tme.eu/sk/en/details/b4_bn1052/threaded-insertions/bossard/1386883/
| mountOne.3mf | 21.0KB | |
| mountOne.stl | 78.0KB | |
| mountTwo.3mf | 133.8KB | |
| mountTwo.stl | 476.0KB |
