Hello friends
This project is a filter project that absorbs the smoke generated in laser engravers. Thanks to the carbon and hepa filters inside, it eliminates both smoke and odor. Below is all the information for this project that you can do at home.
YouTube
Materials
Activated Carbon Filter : https://alishort.com/gOLKx
Hepa Filter : https://alishort.com/sZoRF
Strip Led: https://alishort.com/xsr4C
LM2596 : https://alishort.com/DGpdu
On/off switch : https://alishort.com/vJiz2
24V/1A Adapter : https://alishort.com/45s4D
Aircleaner_Body.STL | 4.6MB | |
Air_Intake.STL | 255.2KB | |
Fan.STL | 1.2MB | |
Fan2.STL | 1.3MB | |
Fan_Guard.STL | 264.8KB | |
Filter_Body_Cover.STL | 67.9KB | |
Filter_Cover.STL | 62.6KB | |
Filter_Cover2.STL | 62.6KB | |
Filter_Cover_Support.STL | 2.2KB | |
Motor_Holder.STL | 56.9KB |