Adjustable, light-tight air intake vent for a laser engraver/cutter enclosure. I use it with my laser/router enclosure, allowing air intake when the laser exhaust is running, and mostly closed off when the router is running.
Print 2 sets of vanes and glue them to either side of the knob. Secure vanes to shell using M3 screws and lock nuts.
| bezel.stl | 38.0KB | |
| knob.stl | 438.0KB | |
| shell.stl | 155.2KB | |
| vanes.stl | 59.5KB |
