The file 'Laser Cut Tevo Tarantula Upgraded Parts' is (dxf,txt,rar) file type, size is 23.4MB.
Hi everyone!
Thank you for your interest in my files.
A few notes:
The files that i have drawn are modified quite a lot from the original but are all tested as these are
parts i made for my own Tarantula.
All tolorances are made WAY higher and parts fit more tight than the original.
Due to the modified ''hot end plate'' some fan duct coolers will not fit without some modification.
i made all my parts from 3mm to save weight as the original parts are thicker, but this does force you to use
washers....don't want to use washers? use 4mm material or thicker.
I build my parts out of stainless steel as i have acces to a laser cutter that won't cut aluminum, if you have the
possibility to use alloyed aluminum, i would go with that!
Have fun upgrading your printer!
ps. for scale please check that ''Corner bracket big - 3mm - 3x per machine'' is 100x100mm big
| bearing_plate_y_end_-_3mm_-_2x_per_machine.dxf | 14.4KB | |
| Bed_-_3mm_-_1x_per_machine.dxf | 20.0KB | |
| Corner_bracket_big_-_3mm_-_3x_per_machine.dxf | 13.8KB | |
| Corner_bracket_small_-_3mm_-_1x_per_machine.dxf | 13.8KB | |
| Hotend_plate_-_3mm_-_1x_per_machine.dxf | 21.6KB | |
| Read_me.txt | 892.0B | |
| Screen_mounting_plate_-_2mm_-_1x_per_machine.dxf | 12.9KB | |
| Stepper_plate_y-end_-_3mm_-_1x_per_machiine.dxf | 15.1KB | |
| Tarantula_parts_by_michael.rar | 23.4MB | |
| Thread_nut_plate_-_3mm_-_1x_or_2x_for_dual_z_per_machine.dxf | 13.6KB | |
| Y-axis_left_side_-_3mm_-_1x_per_machine.dxf | 15.6KB | |
| Y-axis_right_side_-_3mm_-_1x_per_machine.dxf | 16.6KB | |
| Y-sensor_end_-_3mm_-_1x_per_machine.dxf | 12.9KB | |
| Z-stepper_plate_-_3mm_-_1x_or_2x_for_dual_z_per_machine.dxf | 21.4KB |
