Stackable sleigh with tooth pick.
release_sleigh_cut:
Setting are for a 40W laser at ~50% (10mA) and 4 times pass over to reduce burned edges by wood vapor and may vary depending on your plywood quality and air assist.
release_sleigh_engrave:
Setting for engraving is also 10mA with line space 2 and one time.
Design is for A6 (left over) 4mm plywood with a line thickness of 0.2mm from the lasercut.
| release_sleigh_cut.cdr |
| release_sleigh_cut.dxf |
| release_sleigh_engrave.cdr |
| release_sleigh_engrave.dxf |
