Laser Cut Peg Board
The file 'Laser Cut Peg Board' is (dxf) file type, size is 235.6KB.
The file 'Laser Cut Peg Board' is (dxf) file type, size is 235.6KB.
This is a modular pegboard design that we use in our workshop. The design consists of different sized modular boards and a variety of hooks and holders that can be attached in any combination. We find it pretty useful and hope it will help other workshops and studios.
Current drawings are designed to be cut from 6mm plywood or MDF. The spacing between the holes is 30mm. It is currently not compatible with 1 inch (~25mm) standard, so if anyone is willing to adapt these designs to 25 mm system - you are absolutely welcome!
Al you need is a standard laser cutter (we use generic CO2 60W model with 400x600 mm bed) and some plywood. Most of the holder designs have proved itself useful in our shop. It is durable enough to hold most of our hand tools. Enjoy!
| boardshooks.dxf | 1.3MB | |
| holder_1_calipers.dxf | 76.9KB | |
| holder_2_1_planks_horizontal.dxf | 68.7KB | |
| holder_2_planks.dxf | 72.3KB | |
| holder_3_heavy.dxf | 89.0KB | |
| holder_4_hooks.dxf | 82.4KB | |
| holder_5_with_holes.dxf | 150.0KB | |
| holder_6_straight_hooks.dxf | 115.6KB | |
| holder_7_shelves.dxf | 104.9KB | |
| pegboard_30x30.dxf | 111.3KB | |
| pegboard_48x30.dxf | 157.2KB | |
| pegboard_60x30.dxf | 96.3KB | |
| pegboard_60x39_hacklab_lazer.dxf | 227.8KB | |
| pegboard_60x45.dxf | 138.9KB | |
| pegboard_back_spacers.dxf | 88.6KB | |
| peg_board_39x39.dxf | 169.1KB |
