Laser Cut Minitarized Landscape As Ornament
The file 'Laser Cut Minitarized Landscape As Ornament' is (cdr,svg) file type, size is 299.73 KB.
The file 'Laser Cut Minitarized Landscape As Ornament' is (cdr,svg) file type, size is 299.73 KB.
Designed for 3mm material and intended to be glued together. Should fit precisely in a 300x200mm laser machine like k40 chinese laser cutters.
The spaces between on the base and top are very forgiving, mostly because it's far easier to loosely fit the pieces in top and bottom if they aren't super snug. I wanted to leave the top open so that light would come through each layer. Also, the original design from OBUQ had spacing between the layers to give depth and I wanted to preserve that.
green lines should be cut last. Order of panels goes from top left then down.
NOTE: Some of the cutouts are very tiny and congested. You'll want to make sure the laser goes all the way through on these so they come out with the least resistance. Some of my trees also disconnected at the finest points, but I didn't see a real problem with that as most of them are protected behind other layers.
| miniturized_landscape5.cdr |
| miniturized_landscape5.svg |
