Laser cut mini peg board tool holder - made for the tools that always seem to end up all over my desk.
Board is cut from 3mm ply - sized to fit on my laser cutter and to match up with some existing shelving supports I have. Included in the file is a single piece tool board for those with larger laser cutters as well as the split pieces. Design can easily be amended to fit whatever space you have. The separate pieces of the tool board are fixed together with M2x10 nuts/bolts.
I designed it to hang off my existing shelving system with the 2mm cut hangers to fit through the tool board into the shelving frame. The design could easily be amended to mount directly to a wall.
The 'pegs' for the tool board are made up of M2x16 (M2x12 would be better but I had none) nuts with with a 3mm laser cut washer on the back and a 4mm lasercut spacer in the middle.
I've included several example tool holders that could easily be amended to fit other tools.I cut these out of spare off cuts of 3mm acrylic I had but would work just as well in 3mm ply.
| peg_board.dxf |
