Laser Cut LED Flying Butress Starwars Theme
The file 'Laser Cut LED Flying Butress Starwars Theme' is (cdr,dxf) file type, size is 2.8MB.
The file 'Laser Cut LED Flying Butress Starwars Theme' is (cdr,dxf) file type, size is 2.8MB.
Flying butress for 5x 5mm slow (~30s) RGB LED.
Settings for cutting are: for a 40W laser at ~50% (10mA) and 4 times pass over to reduce burned edges by wood vapor. Settings may vary depending on your plywood quality.
Design for A4 plywood with a line thickness of 0.2mm from the lasercut.
Settings for engraving are: for a 40W laser at ~25% (5mA) and one pass over to reduce burned edges by wood vapor. Engraving every 4th line.
| release_schwibbogen_starwars_v1.00.cdr | 1.4MB | |
| release_schwibbogen_starwars_v1.00.dxf | 315.2KB | |
| release_schwibbogen_starwars_v1.00engrave.cdr | 1.3MB | |
| release_schwibbogen_starwars_v1.00engrave.dxf | 174.9KB |
