The file 'Laser Cut Hobby Knife Rack 3D Printer Model' is (svg,scad,gcode,stl) file type, size is 83.3KB.
A holder designed for hobby knives (xacto knives). It has a holder up top that you hold the knives in. The holder takes a small insert of foam core at the bottom - rip the paper off - to keep the tips from snapping if you toss a knife in. Bay below is for holding spare blades.
I've included a box for storing used blades that you can 3d print that will fit in the blade bay.
Cut two of the sides, and one of every other piece.
| hobby_knife_rack-back.svg | 1.6KB | |
| hobby_knife_rack-bin_bottom.svg | 575.0B | |
| hobby_knife_rack-bin_top.svg | 680.0B | |
| hobby_knife_rack-side.svg | 1.6KB | |
| hobby_knife_rack-top.svg | 2.3KB | |
| hobby_knife_rack-tray_front.svg | 499.0B | |
| hobby_knife_rack.scad | 2.8KB | |
| razor_bin-bottom.half.std.gcode | 211.5KB | |
| razor_bin-bottom.half.stl | 8.3KB | |
| razor_bin-bottom.std.gcode | 287.2KB | |
| razor_bin-bottom.stl | 11.4KB | |
| razor_bin-top.half.stl | 9.4KB | |
| razor_bin-top.stl | 13.5KB | |
| razor_bin.scad | 1.1KB |
