Laser Cut FabLamp
The file 'Laser Cut FabLamp' is (dxf) file type, size is 130.7KB.
The file 'Laser Cut FabLamp' is (dxf) file type, size is 130.7KB.
The lamp was designed as a part of my Architecture studio project. It can be made from 1.5mm corrugated cardboard, or, well, whatever sheet material you can lay your hands on...
Parts can be cut with a laser cutter, cardboard cutter or an x-acto knife
To assemble, you'll need three M6 bolts (I recommend using eye bolts to solve cable management.) preferrably with winged nuts, and a standard bulb fixture with collar nuts. I used a cheap E27 fixture. To prevent tipping, throw in a handful of coins or whatever in the bottom box. The bottom part is not finished yet, it needs some glue to assemble.
WARNING! USE LED BULBS ONLY, STANDARD BULBS CAN CAUSE OVERHEATING AND FIRE!
| fablamp_by_ferencbanu.dxf | 1.4MB |
