Laser Cut DiceTower – Bliss Build
The file 'Laser Cut DiceTower – Bliss Build' is (txt,svg) file type, size is 1008.8KB.
The file 'Laser Cut DiceTower – Bliss Build' is (txt,svg) file type, size is 1008.8KB.
Dice Tower [Standard Size - Fixed Tray]
160mm Tall x 80mm Wide x 150mm Long
Designed for 3.175mm (1/8") Material.
Face, Back, and Sides all designed for maximum graphics area.
Other good graphics spots are the Nose, and Top Baffle.
Bottom Baffle angle less than others to slow the dice down on the way out.
Specs:
Main Tower is 80mm x 80mm, Leaving a 60mm Tray.
Front Face is 120mm Tall (and 80mm wide of course)
Tray Nose and Side Walls are 20mm Tall (on the outside)
Baffles (inserts) are 80mm Wide (outside).
Bottom Baffle is 76mm Long @ 30 degrees, Middle and Top are 45mm Long @ 40 degrees each.
| DiceTower_-_Bliss_Build_--_Notes.txt | 620.0B | |
| DiceTower_-_Bliss_Build_-_14x11_-_104mm_x_80mm__3.175_mm_-_Attached_Tray.svg | 1.4MB |
