Clean Desk - Stow away your kitchen supplies
Clean Desk is a simple workbench that optically fits in with the Opendesk tables: Team Desk, Lean Desk and Lift Standing Desk. You can get those here: https://www.opendesk.cc/
It is 170cm long, 68cm deep and stands 75cm tall.
It can be cut out of 2 sheets of 18mm thick multiplex 122 x 240cm.
How it was done
After we made an office full of Team Desks and Lean Desks our customers also wanted a simple small workbench in the same style. For this project the drawing of the Lean Desk leg was adapted to create the leg for the clean desk. The rest of workbench was derived from the leg. After the 3d model was finished I used pattern to layout (a copy off) all the parts on the sheets.(there was no move in history mode) I projected these parts on a sketch to create the cnc profiles. You can find them in the last 2 sketches: "Outside profile all through" and "9mm pocket" The two dxf's were put in one file on different layers and prepared for cnc milling. we used a 6mm bit but a 8mm should also work.
You can download the parametric Fusion File here: http://a360.co/2k0kv16
| Clean_Desk_CNC.dxf | 171.5KB |
