This is a variation of the CNC Router Parts Snap & Glue Birdhouse posted here: https://www.thingiverse.com/thing:1691891
For this remix, I updated the left and right panel to have identical slot arrangement. I also changed up the round hole for a bird shaped hole and repositioned it. The bird shape svg, created by Noe Araujo, came from The Noun Project. You can find it here: https://thenounproject.com/icon/233023/#
The files in this thing are the SVG files that can be used directly with the Shaper Origin. There are outside cuts, inside cuts and pocket cuts.
The birdhouse I made used 1/4" sanded plywood. The pocket cuts were 0.15" deep. I used a 1/8" bit in the Origin. Beyond the plywood, pick up a 1/4" dowel rod for the perch.
After cutting the units out there may be some light sanding of the edges. It is possible the dado on the front panel and rear panel will need to be finished with a knife or snapped out. Then paint up or seal the parts as you see fit, assemble and enjoy.
| Floor_Panel.svg | 7.4KB | |
| Front_Panel.svg | 4.3KB | |
| Left_Panel.svg | 2.7KB | |
| Rear_Panel.svg | 2.1KB | |
| Right_Panel.svg | 2.5KB |
