The stand that you buy for the 3Doodler is not exactly heavy enough to hold the 3Doodler. So i created a foot for this stand, filled it with lead and painted it black.
Here i provide an SVG containing the shapes and measurement that you require to laser cut your own foot for the 3Doodler stand.
The images should be rather self explanatory.
As can be seen on the images with the weight, there is a lot more weight in the foot then the stand, and you can now actually use your 3Doodler stand.
Cut out some layers for the inner part (I used two layers from 4 mm plywood), and a single layer for the bottom. Glued it all together. File down the three places where the plastic holder collide with the inner rings. Shape a piece of lead, and glued it down with lots and lots of hot glue. To give it a bit nicer look paint it with some mat black spray paint.
Required materials: Plywood, lead, wood glue, hot glue, spray paint.
Required tools: Laser cutter, hammer for shaping lead, clamps for holding while glue is drying, pencil for marking where tweaks required, file to perform tweaks.
| stand_bottom.svg | 1.8MB |
