This chess board was designed to also house a set of checkers below the board. It is designed around a chess set that the biggest piece is 60mm in diameter at the bottom of the piece.
Each section of the Board Bottom and Board Top are 245mmx245mm. If you desired to use this for a smaller chess set, it could probably be scaled down.
You will need to print 4 Board Bottoms, 4 Board Tops, 4 supports and 64 individual squares (32 in one color, 32 in another color).
Assembly is quite easy, glue the 4 bottoms together and use 2 supports inside to secure the bottom. Glue the 4 board tops together and use 2 supports on the underside to secure the board top. Then inlay the individual squares and secure them with glue. You can watch this video to see me assemble the board: https://youtu.be/HOHx36k5bEE
The chess set that I printed for this board is the Minimal Look Chess Set found here: https://www.thingiverse.com/thing:2552392
| Board_Bottom.stl | 1.5KB | |
| Board_Top.stl | 1.3KB | |
| Individual_Square.stl | 684.0B | |
| Support.stl | 1.4KB |
