Large Laptop Stand (dell Latitude, Toshiba Satellite 15-17inch) 3D Printer Model
The file 'Large Laptop Stand (dell Latitude, Toshiba Satellite 15-17inch) 3D Printer Model' is (factory,stl) file type, size is 144.76 KB.
The file 'Large Laptop Stand (dell Latitude, Toshiba Satellite 15-17inch) 3D Printer Model' is (factory,stl) file type, size is 144.76 KB.
This one fits for large heavy laptops. I use one for my Dell Latitude, my wife uses one for her Toshiba Satellite 17" ...
Made it in smaller pieces to be printed on smaller beds. The 2 hooks hold the parts together but a bit of cyanocrylate will fix it forever.
Both parts are connected with 3 x 4mm threaded rod with a 6mm brass tube to keep the parts at 270mm and to hide the threaded rods
Height of the hook is 26mm
I printed it in PLA with a 0,6mm nozzle at 0,4mm layerheight. 2 walls, 3 bottom, 3 top, 30% infill fast honeycomb,3600mm/min
You will have to clean up (a bit of filing) the locking part when using larger nozzles due to the wider tracks.
I added the S3D factory files as well
The 2 parts for one side should fit on a 200x200mm bed (see screenshot).
| Laptopstand-Left.factory |
| Laptopstand-Left1.stl |
| Laptopstand-Left2.stl |
| Laptopstand-Right.factory |
| Laptopstand-right1.stl |
| Laptopstand-right2.stl |
