This is a remix of IROTRAS's Glue Stick Dispenser, which was a remix of Justblair's Parametric Cylindrical Battery Dispenser.
I updated it to work with the larger 22g (.77oz) Elmer's purple disappearing glue sticks (that are 27mm in diameter by 103mm long). It should be able to hold 5, maybe 6 in the main dispenser plus the current one that's being used in the holster.
Since it's a bit larger to accommodate the larger sticks, I removed material to reduce print times and plastic usage. I also changed the screw to countersunk flat heads, since that's what I had on hand.
Update 01/25/2018: Per ni2o's suggestion, I added a custom hook to use this with a pegboard. It's made for 1/4 in. holes and a 1 in. hole spacing. It's a modified version of Nightcrispy's Pegboard Hooks. Printing off two hooks holds it pretty well. Attach them around either the top or bottom rung on the back.
| Glue_Stick_Base_Left.stl | 31.7KB | |
| Glue_Stick_Base_Right.stl | 30.2KB | |
| Glue_Stick_Holster_Bottom.stl | 7.5KB | |
| Glue_Stick_Holster_Top.stl | 7.5KB | |
| Glue_Stick_Peg.stl | 41.9KB |
