Large cubby/shelf/whatever drawers. I designed these drawers for a short bookshelf unit with 9 cubby openings in a 3 x 3 layout. I have not printed these, but could be done in PLA quite easily, in ABS if you have a heated enclosure or are just that good. Using various slicer configurations this can be 480g to over one kilogram.
Four different variations on the design done in effort to minimize required material to print, but made for decent looking drawers.
These could be useful in lots of scenarios.
Use at your own risk.
282 mm wide x 282 mm deep x 290mm tall with about a 2-3mm thick wall and base.
| CubbyDrawer-v1.4.stl | 52.8KB | |
| CubbyDrawer-v1.5.stl | 105.7KB | |
| CubbyDrawer-v1.6.stl | 105.7KB | |
| CubbyDrawer-v1.7.stl | 105.7KB |
