Lapras Case Rebuild 3D Printer Model
The file 'Lapras Case Rebuild 3D Printer Model' is (stl,step) file type, size is 14.7MB.
The file 'Lapras Case Rebuild 3D Printer Model' is (stl,step) file type, size is 14.7MB.
This is a rebuild of the Lapras Case by PhoenixLuk based on the brilliant Lapras model by alex23qw. I thought the case was a brilliant idea but unfortunately the hinge was very difficult to print and didn't work so well. So in this model, I improved the hinge and made the everything more printable.
• The pins of the hinge are on the body rather than the shell to allow both parts to be printed with fewer supports.
• I added a small "hinge lock" which is inserted between the two pins of the hinge (see picture) once the shell is attached to give it a nice pressure fit so the shell stays in place when you open it.
• The body now has a flat bottom so it can sit stably on a tabletop.
• The shell can open more than 90°.
• Internal overhangs were made flat so they can be printed without supports
| Lapras_Body_rebuild_v4.stl | 1.9MB | |
| Lapras_chest_rebuild_all.step | 54.4MB | |
| Lapras_hinge_lock.stl | 30.6KB | |
| Lapras_Shell_rebuild_v4.stl | 782.3KB |
