Landinggearholder for the RC Plane Redaq 18.
Drill the hole in the socket with a 3.5mm. Then cut a M4 thread in it.
Glue the sockets into the plane on the correct positions. Use nylonscrews to fix the
gearholder.
For cheap price use rc-car tyres and use the hexadapter on the shaft.
(http://de.aliexpress.com/item/4x-Black-RC-1-10-Off-Road-Remote-Control-Buggy-2x-Front-2x-Rear-Rubber-Tires/32521126434.html)
There are two versions. one with the option to srew the dirtprotection with a M3 screw into the landing gear and one version where you can use glue to fit the parts together.
| landinggear_redaq_hex_v1.stl | 130.2KB | |
| landinggear_redaq_ring.stl | 123.9KB | |
| landinggear_redaq_socketv1.stl | 459.0KB | |
| landinggear_redaq_tireprot_left_v2.stl | 125.8KB | |
| landinggear_redaq_tireprot_left_v3.stl | 156.4KB | |
| landinggear_redaq_tireprot_right_v2.stl | 125.8KB | |
| landinggear_redaq_tireprot_right_v3.stl | 156.0KB | |
| landinggear_redaq_v1.stl | 329.2KB | |
| landinggear_redaq_v2.stl | 563.9KB |
