Left & Right Arm rest for landcruiser 70 series
Design requires metal sheet,bolts, cushioning and fabric
Recesses for magnets
Requires a thin sheet of metal between the arm rest and mounting plates to join everything together & to fit into the door frame
M4 round head bolts ( fillips head) recommended
Length = 500 long, can be 407 long without middle section
L = left passenger side door part
R = Right drivers side part
Split into sections for smaller printer
Files 1-3 main arm rest
Files 4-5 Fabric sandwich plate
Files 6-7 Cusion mounting plate &window clip
Latest updates:
24.08.05 - Centring wedge between parts to help positioning
24.08.04 - Widening of pilot holes from 6mm to 7.1mm to accommodate head
24.09.22 - Inclusion of window clip on the cusion plate and reduction in parts
| 1L_-_BASE.stl | 128.8KB | |
| 1R_-_BASE.stl | 119.5KB | |
| 2L_-_BASEL.stl | 76.6KB | |
| 2R_-_BASE.stl | 74.2KB | |
| 3L_-_BASE.stl | 118.1KB | |
| 3R_-_BASE.stl | 125.4KB | |
| 4L_-_CLAMP.stl | 37.1KB | |
| 4L_-_clamp_.stl | 37.1KB | |
| 4R_-_CLAMP.stl | 37.1KB | |
| 4R_-_clamp_.stl | 37.1KB | |
| 5L_-clamp_.stl | 37.1KB | |
| 5L_-_CLAMP.stl | 37.1KB | |
| 5R_-clamp_.stl | 37.1KB | |
| 5R_-_CLAMP.stl | 37.1KB | |
| 6L_-__hook_.stl | 28.8KB | |
| 6R_-_HOOK.stl | 28.8KB | |
| 7L_-_hook.stl | 33.8KB | |
| 7R_-_HOOK.stl | 33.8KB | |
| comb.stl | 725.5KB |
