Land Rover FC 101 Vampire 3D Printer Model

Author: @
License: CC BY-NC-SA
File formats: stl
Download type: zip
Size:26.6MB

The file 'Land Rover FC 101 Vampire 3D Printer Model' is (stl) file type, size is 26.6MB.

Summary

A rework of VJM787 Land Rover FC101

Converted to represent the Vampire radio van version

Vampire" Radio Body (Approx. 20 made, body by Marshall's of Cambridge).

The Vampire acronym means: Vehicle Army Mobile Position Interferometry Radio Equipment.
The vehicle's purpose was to identify the origin of radio signals.

Teams of 3 Vampires would erect their antennas in different remote locations and then use a method of radio triangulation to locate signal sources. The Vampires could also operate individually by setting up additional antennas some distance away that were carried in a specialized Sankey Trailer. The antenna mast was stored diagonally across the roof of the vehicle. It was unlocked and then swung into a vertical position, before telescoping to the required operational height. Levelling jacks are installed on the rear corners of the vehicle to increase its stability while the antenna was raised. Vampires have no rear door and instead have a large spool of cable that reeled out as the antenna went up. Some 101's came with a unique transmission driven Nokken winch, whose 65 metre cable can be routed fore or aft of the vehicle through a chassis mounted pulley system.
2 versions are included

model 1 has antenor folded down
model 2 has antenor extended

scale is 1/76

Vampire-v1.0.stl 39.9MB
Vampire-v1.2.stl 40.8MB