Lamello P2 Zeta Spacer 3D Printer Model
The file 'Lamello P2 Zeta Spacer 3D Printer Model' is (stl) file type, size is 1.7MB.
The file 'Lamello P2 Zeta Spacer 3D Printer Model' is (stl) file type, size is 1.7MB.
Unfortunately I do not own Lamello P2 Zeta jointer. But I had a request to do some modifications from CW for the spacer to work on his machine.
There were very few modifications required, the main one being the distance between the clip and the spacer increased by 1.75mm to 10.5mm. (height of posts)
I have not printed these parts but they are very similar to the Classic X spacer I published a while back.
https://www.thingiverse.com/thing:4899831
If anyone has some feedback, on fit / suggestions for improvement please let me know. Pictures of your makes. Thanks
The clip need to be turned over from the modelling orientation.
I printed them in PLA, but other materials would work.
The left clip has a "A" printed on is, made sure this is assembled on the peg with the "A" on it.
If anyone would like other size spacer, I would be happy to create the STL files.
It is modelled in Fusion 360 so they are easy to create.
Any feedback would be appreciated.
If you like/appreciate my design please consider making a small donation via Paypal
| Lamello_Spacer_1.5mm_P2_Zeta_v7.stl | 466.9KB | |
| Lamello_Spacer_1mm_P2_Zeta_v7.stl | 423.5KB | |
| Lamello_Spacer_2.5mm_P2_Zeta_v7.stl | 478.2KB | |
| Lamello_Spacer_2mm_P2_Zeta_v7.stl | 434.8KB | |
| Lamello_Spacer_3.5mm_P2_Zeta_v2.stl | 1.4MB | |
| Lamello_Spacer_3mm_P2_Zeta_v2.stl | 1.4MB | |
| Lamello_Spacer_5mm_P2_Zeta_v2.stl | 1.3MB | |
| Lamello_Spacer_6mm_P2_Zeta_v2.stl | 1.3MB | |
| Lamello_Spacer_P2_Zeta_v2_Clip_Left.stl | 91.6KB | |
| Lamello_Spacer_P2_Zeta_v2_Clip_Right.stl | 72.7KB |
