"Lakitus are Koopas who ride clouds through the skies, mostly dropping Spiny Eggs on Mario or Luigi. When they are defeated, their clouds can be ridden for a short amount of time. In other games, however, they appear to be taking on friendly roles, such as refereeing races and tennis and baseball games, and even filming Mario's adventures" - from https://www.mariowiki.com/Lakitu
This is a multi-color print. Print each part in the right color and glue then afterward.
The total height is about 15 cm.
Most of the parts are support free. Depending on your printer capabilities, you may need supports on some parts. Fortunately, only a few areas will demand supports and those sections are barely visible.
Be aware that some pieces, especially “shell_border” and “arm_right”, have small bases compared to the overall size. Be careful to check your bed adherence. Use a brim or raft if needed.
If you glue “shell_border” before “body”, you won’t be able to insert the last. Those two pieces must be inserted together.
Let me know if you have any questions.
Enjoy!
| arm_left.stl | 1.7MB | |
| arm_right.stl | 1.2MB | |
| ball_bottom.stl | 896.2KB | |
| ball_spike_x_11.stl | 101.9KB | |
| ball_top.stl | 959.0KB | |
| body.stl | 1.3MB | |
| cloud.stl | 1.5MB | |
| cloud_eye_left.stl | 313.5KB | |
| cloud_eye_right.stl | 313.5KB | |
| eye_black_left.stl | 214.9KB | |
| eye_black_right.stl | 214.7KB | |
| eye_white_left.stl | 35.3KB | |
| eye_white_right.stl | 35.3KB | |
| glasses.stl | 175.1KB | |
| hair.stl | 1.8MB | |
| head.stl | 3.4MB | |
| shell_1_green.stl | 398.0KB | |
| shell_2_black.stl | 389.4KB | |
| shell_3_green.stl | 382.7KB | |
| shell_4_black.stl | 383.9KB | |
| shell_5_green.stl | 478.4KB | |
| shell_border.stl | 813.1KB |
![Maakmake] Camel Partition Hanger 2 3D Printer Model](https://res.3axis.co/088bdf23-101c-4cbd-8ec1-d99504faa31f/images/198e2ea2-3600-4ee6-8823-90e1b1e3655b_thumb.jpg)
