Lack Enclosure Camera Mount 3D Printer Model
The file 'Lack Enclosure Camera Mount 3D Printer Model' is (stl) file type, size is 297.9KB.
The file 'Lack Enclosure Camera Mount 3D Printer Model' is (stl) file type, size is 297.9KB.
Built this suspended camera mount for my IKEA Lack enclosure. Wanted something that gave an overall view of the print bed while not getting in the way. Because the pin doesn't fix the hinge, the camera is free to swing out of the way when you reach into the enclosure as well as auto adjust itself if you adjust the camera.
The base of the camera mounts is screwed to the underside of the table above the printer. The arm is then attached using either 3mmx30mm screws, or in my case, a 3mm wire pin. The camera screws onto the arm by way of a 1/4"x20x1/2" screw.
| Camera_Mount_Arm_v2.stl | 643.9KB | |
| Camera_Mount_Base_v2.stl | 247.2KB |
